| Content | Product Features: - Dry Acid / pH Minus for the maintenance and treatment of pool water.
- Decreases and stabilises the water pH level.
- Water transparency
- Decreases the acidity of the water
- Fast dissolving product, highly stabilizes
How to use:- The perfect pH balance should be between 7.2 - 7.6
- The pH level is easily determined using a kit for pH and chlorine testing and should be performed twice a day.
- Add 1.5 kg of Aquaclear pH Minus every 26,417 gallons of water, to decrease the pH by 0.2 units.
| Product Features: -Designed for the safe and simple application of chlorine sanitiser.
-Highly compressed to dissolve slower and last longer
-Fast acting pure tri-chlor with non of the fillers or binders used in other tabs.
-Stabilized against the sun's UV rays to prevent chlorine burn-off How to use: -Use in skimmer baskets, floating dispensers or chlorine dosing equipment
-Approximately 1 Tablet (200grams) per 2,000 gallons fo pool water per week
-Replace the chlorine tablets once completely dissolved. | Product Features: • Effective on most free-floating algae and algae that cling to the walls and bottoms of pools.
• This product does not stain pool surfaces or swimmers’ hair.
• Is compatible with most chemicals commonly used to treat pool water.
• Prevents algal growth and eliminates existing algae in pools. How to use: • For initial treatment add 200ml of Aquaclear Algaecide-10 per 2,642 gallons of water.
• For maintenance add 50ml of Aquaclear Algaecide-10 per 2,642 gallons of water every week. | Product Features:- High chlorine content Quality maintained for longer period.
- Rapid dissolution in water.
- High solubility : 90% or above dissolve within 4 minutes.
- Safe, represents no hazardous gas as liquid chloride does.
- Minimum release of dangerous chlorine gas both in granular and solution form.
How To Use:- Used as sanitiser for pools and spas.
- Used as a shock treatment on ground pools.
- 100 grams increases the chlorine level by 1ppm in a 10,000 gallon pool.
- Add 750 grams per 10,000 gallons of pool. water.
| Product Features: - Enjoy crystal clear water in your pool the easy and natural way with pure diatomaceous earth powder for your DE filter system. Commonly known as D.E., diatomaceous earth for pools is an all-natural, high-grade powder derived from tiny fossilized exoskeletons of algae-like water plants called diatoms. DE powder provides outstanding DE filtration results for your pool compared to sand filters and cartridge filter systems.
How to use:- You will need about 4-6 pounds of DE Powder to coat new grids or to replace the old DE Power that is striped off old grids during backwash. Buy this ahead of time so it is available when you need it. The DE Powder will last for 4-6 separate backwashes
- Ensure that your filter's Multiport Valve (MPV) is set on FILTER mode.
- Turn the pool pump ON and let it reach prime.
- The Air Relief Valve should be open to let air out of the top of the filter. Close this valve when a steady stream of water shoots out the end of the valve.
- Remove the cover to the skimmer closest to the pump and filter. Slowly add the required amount of DE Powder into the skimmer. If you simply dump the DE Powder into the skimmer, you may clog the pipes.
| Product Features:- High chlorine content Quality maintained for longer period.
- Rapid dissolution in water.
- High solubility : 90% or above dissolve within 4 minutes.
- Safe, represents no hazardous gas as liquid chloride does.
- Minimum release of dangerous chlorine gas both in granular and solution form.
How To Use:- Used as sanitiser for pools and spas.
- Used as a shock treatment on ground pools.
- 100 grams increases the chlorine level by 1ppm in a 10,000 gallon pool.
- Add 750 grams per 10,000 gallons of pool. water.
|
Reviews
There are no reviews yet.